40’ x 280’ Classic Series Frame Tent
www.GetTent.com / www.CelinaTent.com
PG.7
© 2013 Celina Tent Inc.
Set Up Instructions
1. Layout the frame parts on the ground in the approximate location that they will be when the frame is assem
-
bled. (See parts / minimum staking layout diagram)
2. Place the 6-way crown in the framework; the protrusions on the crown will alternate between lifted and
touching the ground when it is laid on a level surface. All lifted protrusions will point to the hip rafters, angled
toward the corners of the tent. The protrusion parallel to the ground will point toward the other 6-way crown.
3. Connect the 6-way crown to the hip rafters (14’4” red):
a. Each protrusion on the crown has two holes; one closer to the center (the alignment hole) and one
further down the protrusion (the placement hole).
b. Place a pin in the alignment hole; this keeps the rafter from moving too far onto the crown. Slide the
tubing onto the protrusion until it meets the pin.
c. Align the placement hole in the crown with the hole in the rafter and insert a pin.
d. Remove the alignment hole pin. (*This procedure applies to all frame fittings)
4. Connect the rest of the tubing in the following order:
a. To the 6-way crown:
i. Rafters (21’10.5” red) to 6-way crown
ii. 6-way hip joint to each hip rafter (14’4” red)
iii. First spreader (9’4” white) to the 6-way crown
iv. First spreader (9’4” white) to first ridge crown
v. Rafters (21’10.5” red) to first ridge crown
vi. First ridge crown to second spreader (9’4” white)
vii. Second spreader (9’4” white) to second ridge crown
viii. Rafters (21’10.5” red) to second ridge crown
ix. Third spreader (9’4” white) to second ridge crown
x. Third ridge crown to third spreader (9’4” white)
xi. Rafters (21’10.5” red) to third ridge crown
xii. Fourth spreader (9’4” white) to third ridge crown
xiii. Fourth ridge crown to fourth spreader (9’4” white)
xiv. Rafters (21’10.5” red) to fourth ridge crown
xv. Fifth spreader (9’4” white) to fourth ridge crown
xvi. Fifth ridge crown to fifth spreader (9’4” white)
xvii. Rafters (21’10.5” red) to fifth ridge crown
xviii. Sixth spreader (9’4” white) to fifth ridge crown
xix. Sixth ridge crown to sixth spreader (9’4” white)
xx. Rafters (21’10.5” red) to sixth ridge crown
xxi. Seventh spreader (9’4” white) to sixth ridge crown
xxii. Seventh ridge crown to seventh spreader (9’4” white)
xxiii. Rafters (21’10.5” red) to seventh ridge crown
xxiv. Eighth spreader (9’4” white) to seventh ridge crown
xxv. Eighth ridge crown to eighth spreader (9’4” white)
xxvi. Rafters (21’10.5” red) to eighth ridge crown
xxvii. Ninth spreader (9’4” white) to eighth ridge crown
xxviii. Ninth ridge crown to ninth spreader (9’4” white)
xxix. Rafters (21’10.5” red) to ninth ridge crown
SAFETY
MAINTENANCE
INS
TALLA
TION
CONT
AC
TS
INSTALLATION INSTRUCTIONS
