Page 1 of 4
MEASURING CABLE REPLACEMENT
FOR MTA SERIES
For Models
MTA-3, MTA-5
Celesco Transducer Products 7800 Deering Avenue, Canoga Park, CA 91309 Tel: 800-884-6860, Fax 818-34-1175Created 2/22/99 C:MTA
Страница 1: ...Page 1 of 4 MEASURING CABLE REPLACEMENT FOR MTA SERIES For Models MTA 3 MTA 5 Celesco Transducer Products 7800 Deering Avenue Canoga Park CA 91309 Tel 800 884 6860 Fax 818 34 1175 Created 2 22 99 C MTA ...
Страница 2: ... the spool and side plate out of the housing while holding together 7 Insert a small flathead screwdriver between the side plate and the spool and gently slide the spring off the spring arbor the spring arbor is part of the spool Slide from the spool toward the side plate Using the screw driver to keep the spring in place in the side plate separate the spring and side plate Be careful not to lose ...
Страница 3: ...sing 18 Tighten the set screws enough to keep the side plate in place but loose enough it can be rotated 19 Replace the end plate pot side aligning the marks created during disassembly 20 Tighten the set screws to keep the end plate pot side in place bot loose enough it can be rotated 21 Insert a pair of needle nose pliers into the two blind holes on the side plate and rotate counterclockwise reel...
Страница 4: ...Page 4 of 4 28 Remove all set screws one at a time apply Loctite primer 7649 and loctite adhesive 222 on the threads and replace ...
