User manual
Multifunctional charging torch HL170 COB Motion
Properties:
1. Professional long life product with COB (Chip on board) Tech strip
2. Universal device: headlamp and flashlight in one
3. Small dimensions are an advantage when working in confined spaces
4. PMMA (Poly-Methyl- Methacrylate) lens - with 100% reflection technology.
5. Battery: 500 mAh, 3.7V type: Li-ion
6. The battery is protected against overcharging and discharging.
7. Charge time approx. 3-4 hours
8. Belt clip included
Use:
1. From off position, click power button once to get high beam 170 lm
2. From off position, click power button twice to get low beam 60 lm
3. From off position, click power button 3 times to get Red beam
4. From off position, click power button 4 times to get Red flasher
5. Long press the power button to get red light for motion sensor functions (sensor distance: 6-10cm)
Charging: Connect the USB cable to the flashlight with one end - carefully avoid the rubber sealing
cap - and the other to the 5V USB power supply. When fully charged, the LED turn blue. Charging
should not take longer than 3-4 hours. When the battery is fully charged, disconnect the cable from
the power supply.
Battery recycle disposal: Li-ion batteries are designed to hold a charge up to 500 cycles. Lifespan
depends on the quality of care and maintenance. For longer life, do not leave them discharged for
longer periods. Ideal storage is at about 80% of the battery capacity. Li-ion rechargeable batteries
must be properly recycled and disposed of, do not belong in municipal waste. Dispose of at
designated collection points.
Warning: Not intended for children under 3 years.
Made in China
tlačítko
napájení
otočné
tělo 360°
Technical support and service:
www.cel-tec.cz /
Made in China
Producer and Importer to EU: VARNET s.r.o.
U Oburky 5
67401 Trebic
Czech Republic
detektor
pohybu
otevření
klip
složení
čelenka
nabíjecí USB port
