3
FI002K0018v1530hUK – THS/21 Instruction manual for installation, use and maintenance
INSTALLATION
66 ORIGINAL
INSTRUCTION
3.2 Unpacking
Store the system in its original packaging, or in a way that protects it adequately from atmospheric
agents or other possible causes of damage (moving objects, weights, solvents etc.).
3.2.1 Metal
Detector
3.2.1.1 Handling and moving the packaged device
Handle the package with care and without excessive force during
movement.
To move and handle the packaged device, use a forklift truck with a
sufficient load-bearing capacity. Ensure that the load is balanced during
handling and transport.
Other transport methods are forbidden.
Place the equipment, still in its package, as close as possible to the final
installation site.
3.2.1.2 Unpacking
procedure
Keep the packaging materials for possible future transport.
Read the packing list to check that
the packing content is complete.
Using cutters, cut and remove all
plastic straps from the packing.
Using pliers, extract all metal
staples from the upper surface of
the packing.
Open the box and remove the
protective support.
Using pliers, extract all metal
staples from the bottom side
surface of the packing.
Lift the box upwards from the
wooden base, taking care that the
Power Supply Box does not fall
out.
