User Instructions for Commodes
T304
– T306 – T317 – T58 – T59 – T60
Ref: Commodes May 2020
Form No: Cef 0035
Pack Contents
Commode
User Instructions
Assembly Instructions
Please note:
When unpacking carefully examine the product to ensure it is complete.
Before use check for any damage. If damaged please contact your supplier
and refrain from using the product.
Do not attempt to use if the product is damaged.
Correct Use
Remove the vinyl modesty cover to use the commode.
Replace the vinyl modesty cover note: - this is not designed to be sat on as it
is not fixed to the frame it is for cosmetic purposes only.
Please empty the potty at regular intervals and be aware of its maximum
capacity.
Do not attempt to move the commode whilst occupied
Locating the Potty:
To locate the potty in the commode, remove the loose modesty cover and
raise the toilet seat to a vertical position resting it against the backrest.
By holding the potty handle in the vertical position, place the potty, lid
uppermost on the support brackets ensuring an accurate location of the wide
brim on the brackets.
Remove lid, fold the potty handle down and lower the toilet seat into the
horizontal position.
Removing the Potty:
Once the commode has been used, repeat the process in the reverse order
ensuring that the lid is correctly placed to avoid possible spillage.
Height Adjustment
– T58, T60, T304 & T317 Only.
Remove the pin clip from each of the legs.
Select the required height of the frame by gently sliding each extension leg in
or out.
When desired height is found refit the pin clip into the appropriate hole in each
extension leg.
Ensuring it goes fully through. Ensure that all legs are set to the same height.
