User Instruction for the Rise & Fall Table Range
B43 Rise & Fall Table & B431 Low Height Version
B430 with Wheelchair Friendly Base & B432 Low Height
Version
Ref: B43 Range March 2014
Form No: Cef 0035
1.
Introduction
The Rise & Fall Table is designed to aid the user for dining, reading or writing. This table offers luxury for both the
user and the carer. Its spring-loaded easy rise and fall mechanism enables clients with poor grip to adjust by finger
action only. It has a large table surface area and is adjustable in height. The beech polished top is hard wearing and
easy to clean, and the retaining table edges prevent items slipping off. The B430 and B432 models have a U-Shaped
frame that enables the products to be used over a bed or around a wheelchair.
2. Contents
User Instructions (this leaflet)
3. Assembly Instructions
Carefully unpack and examine the product to ensure that it is complete.
Before use, check for any signs of damage e.g. cracked weld, flaking of paint, bent tube. If any signs occur
please contact your supplier to exchange and refrain from using the product.
DO NOT ATTEMPT TO
USE IF PRODUCT IS DAMAGED.
4. Correct Use
The table is designed to help the user by being used as a dining, reading, or writing aid.
The table is not intended to support full body weight so refrain from attempting to lift full body weight via
the product
The table should be placed either against a bed or chair.
Do not attempt to overload the table.
Height Adjustment:
To adjust the height of the table top, press and hold the locking bar
situated on the side of the table, the table top will now freely move.
When the desired height is achieved release the locking bar, the table
top will now lock into position.
To lower the table top height press and hold in the locking bar and
press down on table top (at the column end) to the desired height and
then release the locking bar.
Product specification
Rise (from-to)
B43 & B430
750mm – 1100mm
Rise (from-to)
B431 & B432
630mm – 825mm
Height of legs from floor
90mm
Top size
810mm x 455mm
Top size
B430
780mm x 1114mm
Footprint
B43 & B431
810mm x 455mm
Footprint
B430 & B432
970mm x 440mm
Parts list
Description
Part No
Castors (Set of 4)
70023I/1
B43 Rise & Fall
Table
Spring loaded
easy Rise &
Fall mechanism
