CEFLA NewTom 5G Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 110

CEFLA NewTom 5G Скачать руководство пользователя страница 48

6 Scanning

The choice of the modality can be performed selecting the corresponding FOV button from the

"Scan

Manager"

panel located on the bottom right corner of the NNT main window.

6.1 Patient scan

6.1.1 Patient preparation

An important step in a scan routine is well preparing the patient. This can contribute to a proper scanning
and to high quality images.
The aim of such preparing is making the patient relaxed and in a good position before and during the scan.

Here are some suggestions that can help in this concern.

✔

Room setting

Be sure that the scanner unit is clean and ready to scan (

"Daily Check"

and

"Blank Acquisition"

already performed).

✔

Preparing the patient

Ask the patient to remove if present any jewelry (earrings, necklaces), glasses and removable
metallic prothesis.

✔

Accommodating the patient

After accommodating the patient in the patient table, move it in the scan area and adjust the table so
as to frame the interested area and the neck/bust of the patient assumes a correct position.

✔

Explanation of the examination

Please explain in short the scan routine to the patient, including the data collection process, the
positioning and scanning.

✔

Particular patients

A special care has to be taken in case of children, elderly people, claustrophobic people, physically
or mentally disabled.

✔

Proper breathing

Ask the patient to breathe slowly during the scanning (a slow and continuous breath helps from
swallowing).

6-2

NewTom 5G

– User Manual

«
...
46
47
48
49
50
...
»

Содержание NewTom 5G















































































































Отзывы:

Нет отзывов