
3 Safety and maintenance of the device
3 Safety and maintenance of the device
This chapter includes information about environmental safety and care for the device. General information
and procedures regarding the device maintenance are also provided.
The user is responsible for a proper use of the system, according to the instructions and procedures which
are described inside this manual. Particularly an user must comply with the following points:
✔
The device may be used only by authorized and properly trained (about the system and the
protection from radiation exposure) personnel. He/she may also know the regulations regarding the
use of radiological devices.
✔
The device may never be used in case of any evident electrical mechanical or radiological
malfunctioning. Especially a device can not be used whenever the x-ray emission displays and/or the
emergency button are not working properly.
3.1 Installation requirements
The system must be installed in a medical environment, according to a Qualified Expert recommendations.
A device may not be exposed to acids, corrosive substances, saltiness and wet.
Operating temperature:
from +10° to +35° (Celsius)
Operating humidity condition:
min 10%, max 85% (not condensing)
Installation site minimum dimensions:
3.30m x 2.50 x 2 m (130'' x 98.5'' x 80'')
The device must be installed on a flat horizontal floor.
The power supply connection must be implemented according to the laws in force and to the instructions
from the “
Service Manual”
.
Don’t use temporary connections such as adapter and extension cords to connect the computer and
peripherals to the mains.
The equipment should be permanently connected to the mains according to the instructions stated in the
“
Service Manual”.
The medical environment for the installation has to be designed by an expert in protection from ionizing
radiation exposure according to the laws in force. Local laws shall also rule the design of the signposting.
WARNING:
Never move a device after it has been installed. Moving a
device may damage people, the device itself or the
environment.
Connect only approved peripherals, computer and cables
to the equipment as specified by the manufacturer.
NewTom 5G
– User Manual
3-1
Содержание NewTom 5G
