CEFLA NewTom 5G Vet, Руководство по присоединению, Страница: 17 / 68

4 Getting started
4.4 Scanning unit
4.4.1 Signalling and command keyboards
The scanning unit, called Scanner, is the centre of the system.
At the sides of the scanning hole, on the circular ring shaped cover, there are two keyboards for the lights
that indicate the device is switched on and the status of x-ray emissions.
Also located on the keyboards is the power button for the laser modules to be used during patient
positioning.
Next is a brief description of each button and sign:
Emergency button:
to be used only during danger situations.
To restore the default condition after pressing the button,
rotate it in the direction indicated by the arrows.
Power ON indicator:
A green LED turns on after the device has been switched ON
by pushing the main switch located on the input panel.
X-Ray emission indicator:
A yellow LED will turn on during ray emission from the device.
Laser Button(L):
Turns the positioning laser beam on/off. The laser will light up
for about 60 seconds.
4-4 Veterinary Application
Figure 3: Scanner unit keyboards