Cedima • Technical Documentation • Joint Cutter CF•1020 D • Issue date: 21/09/2021
75
Refilling operating materials
Maintenance, Repairs and Shut-Down
The following principles apply for maintenance and repairs:
• Maintenance or repair work may only be performed on the machine by persons quali-
fied to do so.
• The intervals specified in the maintenance schedule must be complied with.
• The machine must be shut down prior to maintenance and repair work.
• Access must be blocked for unauthorised persons. Information signs must be set up
if necessary, which draw attention to the maintenance and/or repair work.
• Always use suitable lifting gear and slings in proper condition.
• Work under the machine may only be carried out when the machine is properly secured.
• It is prohibited to climb on the machine. Only use approved climbing aids.
• The machine parts can become very hot during operation. Allow the machine to cool
down before performing maintenance or repair work.
• Always have a first-aid kit at hand.
Perform maintenance on the engine regularly and examine it for damage in accordance with
the manufacturer's recommendations. In addition, the entire machine must be cleaned and
checked regularly in accordance with the degree of soiling.
In particular, it should be ensured that there are no damaged parts or components and no
loose screws or bolts on the machine.
Damaged components must be replaced immediately in order to ensure the safety of the
operating personnel and the proper operation of the machine.
The safety equipment (Emergency-Stop buttons) must be checked at regular intervals and its
proper operation tested.
8.2 Refilling operating materials
Information on refilling the operating materials of the machine is provided here:
• Refilling diesel (page 76)
• Refilling engine oil (page 78)
