2 CHANNELS BIESTABLE
RECEIVER VIA CABLE
TL-63
TECHNICAL CHARACTERISTICS
Voltage. ........................................................................... Through the booster.
Minimum Consumption. ................................................... 20 mA.
Maximum Consumption. .................................................. 120 mA.
Max Load per Output . ...................................................... 3 A.
Protection against polarity inversion, (P.I.P.). ................... Yes.
Dimensions. .......................................................................106 X 62 X 30 mm.
The TL-63will decode codes sent from the emitter, recognizing channels and connecting or disconnecting consequently
outputs. It admits TL-50 and TL-51 transmitters .
It includes micro switches to select the code, indicator leds, and connection terminals.
INSTALLATION
Note
. Before to start the installation, it is very important to carefully read the TL-55’s (booster) instruction manual, then you
could use this module.
POWER SUPPLY AND DATA ENTRY
. The TL-63 supply doesn’t require an external power supply. The module will be fed
directly from the Receivers Communication Cable, provided by the booster, which also supply control data. For this
connection do not use an independent cable from each receiver to the booster, but an union cable between your TL-61 and
the Mmin Communication cable with Receivers. See Fig 1.
.
Therefore, connect the positive and the negative cables of the power supply input and Data of the TL-61 to the respective positive and
negative Communication Cable with Receivers. Before to follow the installation, make sure that the assembly has been correctly done.
