CE+T Power BRAVO ST-120 VAC-UL, Руководство пользователя

Страница: 7 / 38

3. Warranty and Safety Conditions
*
WARNING:
The electronics in the power supply system are designed for an indoor, clean environment.
When installed in a dusty and/or corrosive environment, indoors, it is important to:
•
Install an appropriate filter on the enclosure door or on the room’s air conditioning system. Installation of filters
may result in de-rating of module.
•
Keep the enclosure door closed during operation.
•
Replace the filters on a regular basis.
Important Safety Instructions, Save These Instructions.
3.1 Disclaimer
•
The manufacturer declines all responsibilities if equipment is not installed, used, or operated according to the
instructions herein by factory certified technicians according to local regulations.
•
Warranty does not apply if the product is not installed, used or handled according to the instructions in the
manual. Manufacturer may waive warranty if the system is not installed and commissioned by factory trained
technician.
•
This equipment is shipped with a SHOCKWATCH monitor. If the SHOCKWATCH shows that the equipment was
exposed to excessive force the warranty will be void.
3.2 Technical care
•
This electronic equipment can only be repaired or maintained by a “qualified employee” with adequate training.
Even personnel who are in charge of simple repairs or maintenance are required to have knowledge or
experience related to product maintenance.
•
Please follow the procedures contained in this Manual, and note all the “DANGER”, “WARNING” AND “NOTICE”
marks contained in this Manual. Warning labels must not be removed.
•
Qualified employees are trained to recognize and avoid any dangers that might be present when working on or
near exposed electrical parts.
•
Qualified employees know how to lock out and tag out machines so the machines will not accidentally be turned
on and injure employees working on them.
•
Qualified employees are trained in OSHA and NFPA safety related work practices, and NFPA 70E Arc Flash
Protection and PPE requirements.
•
All operators are to be trained to perform the emergency shut-down procedure.
•
Never wear metallic objects such as rings, watches, or bracelets during installation, service and maintenance of
the product.
•
The allowable operating temperature range is -20°C to +40°C.
•
Insulated tools must be used at all times when working with live systems.
* These instructions are valid for most CE+T Products/Systems. Some points might however not be valid for the product
described in this manual.
Warranty and Safety Conditions
7 - Bravo ST 120 Vac - 2+1 Redundancy - User Manual - v1.0