CDVI ievo IFACE, Руководство пользователя

Страница: 18 / 20

EN EN
18
IFACE™
ievo iface™ Facial Recognition Terminal
3. Communication
Sub-menu Options Description
TCP/IP User DHCP Selects whether to use DHCP
IP Shows the device’s IP address
Subnet Shows the subnet mask
Gateway Shows the gateway address
DNS 1 Shows the DNS #1
DNS 2 Shows the DNS #2
Server User server Selects whether to use server
Server IP Types the server’s IP address
Port Types the server’s port number
Commute Uri Type server URI to receive T&A event logs from device
Sync Uri Type server URI to receive T&A event logs backed up by
Sub-menu Options Description
Tamper Modes Selects a tamper protection mode: Not used, Beep
mode, Secure mode
Device info Device name Configures the device name
Model Shows the model name
FW version Shows the device firmware version
APP version Shows the application version
MAC Shows the MAC address
S/N Shows the serial number
IOMicom version Shows the IO Micom revision number
H/W version Shows the hardware revision number
RF Micom version Shows the RF Micom revision number
Algo version
Shows the algorithm revision number
Database User import Imports the user database from connected USB drive
User export Exports the user database to connected USB drive
Debug export Exports the debug data to connected USB drive
LED Signal Configures LED signal through EF-IO (Under
development)
Reset Device reboot Restarts device
Factory reset Resets all configuration settings and deletes all user data
Reset all config Sets all configuration settings to default
Reset all users Deletes all user data
Standalone mode: If you select Secure mode, all the data and
settings are deleted permanently in the device when physical
tampering is detected / attempted.
isync software:
The software will repopulate the device after data
deletion for all previously registered users.