-16-
Adding User Cards:
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer
Beep+, Beep
UNLOCK Indicator:OFF
TALK Indicator:Blink one time
Buzzer
Beep+
Show user cards to be
added in sequence.
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep, Beep+
SETUP INSTRUCTIONS
Deleting User Cards:
Initializing Access (delete all user cards):
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
UNLOCK Indicator:Blink one time
TALK Indicator:OFF
Buzzer
Beep+
UNLOCK Indicator:OFF
TALK Indicator:OFF
Buzzer
Beep, Beep+
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
UNLOCK Indicator:
Blink for some time
TALK Indicator:Blink for some time
Buzzer
Beep
Show the MASTER CARD
ADD to ID card window in
standby.
Show the MASTER CARD
ADD again to exit.
Show the MASTER CARD
DELETE to ID card window
in standby.
Show the MASTER CARD
ADD to ID card window.
Show the MASTER CARD
ADD again, format is
activated.
Show the MASTER CARD
DELETE to ID card window
in standby.
Show user cards to be
deleted in sequence.
Show the f MASTER
CARD DELETE again to
exit.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
•
To add
a
user card, access
control
must be
set to
by station
, see page 15
.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
• To add a user card, access control must be set to door station, see page 15.
• If there is no operation within 10 seconds, the door station will exit programming mode automatically.
•
To add user card, access
control
must be
set
to
door station.
•
During
step
3, the UNLOCK & TALK indicator will
flash constantly
until formatting
has
finished.
• When formatting is finished, UNLOCK & TALK indicator will turn off
followed by a
“ Beep+ ”
, exit
of setting
mode will be completed automatically.