Manufacturing Access Control since 1985
C3M11
300Kg Mortice Electromagnetic lock
G0301FR0339V01
All the information contained within this document (photos, drawing, features, specifi cations and dimensions) could be perceptibly different and can be changed without prior notice.
EN
PRODUCT PRESENTATION
INSTALLATION
ELECTRICAL CONNECTIONS
PACKAGE CONTENTS
NFS 61-937.
Monitored.
Mortice.
Delivered with armature plate.
Corrosion resistance.
No mechanical wear.
Ease of installation.
Recommended for indoor use.
Fail safe (Door unlocked when power off).
Holding force:
300kg.
No residual magnetism.
Built-in varistor:
Built-in electronic
protection to eliminate back EMF.
Dimensions (L x W x D): 228 x 38 x 27mm.
Armature dimensions (L x W x D): 185 x 38 x 11mm.
Power supply: 12/24V dc.
Power absorption:
- 12 V DC = 550mA,
- 24 V DC = 275mA.
DIRECT CONNECTION
Red
Red
+
+
White
White
-
-
Green
Green
Black
Black
The NO/NC signal only switches when
the door is closed with the power to it on.
12V dc Default setup
Terminal
block
Correspondence
+
12 or 24V dc
-
- 0 V
N.C
NC (Normally closed)
COM
COM
N.O
NO (Normally open)
WITH BUILT-IN PCB BOARD
Steel washer
Roll pin
Armature plate
Roll pin
Guide piece
Cap nut
Rubber washer
Armature screw
ARD212
BS602
Recommended
power supplies
EC certifi cation
WEEE & RoHS
IP42
Mortice
magnetic
lock
Armature
plate
Roll pin
5x16
Steel
washers
Rubber
washers
M8x35
screw
Cap nut
Guide
piece
installation
Manual
1
1
2
2
2
1
1
1
1
- Check the jumper position before connecting
the lock to the input current. A wrong position
could damage the lock. This type of damage
is not covered by the warranty.
- Make sure that the magnet and the armature
meet evenly over their entire mating surfaces.
The Armature plate must be able to pivot
slightly about its center mounting screw
to compensate for any door misalignment.
IMPORTANT NOTE
Yellow
NC
Red
Blue
COM
White
Green
Orange
NO
Black
12V dc
24V dc
Yellow
NC
Blue
COM
Orange
NO
