for non-contact and internal temperatures
• NSF
®
Certified
• 1 & 3 second responses
• 1.5 mm thin tip
• 3.75” (9.53 cm) probe
• Infrared for non-contact surface temperatures
• Thermocouple probe for internal temperatures
• Dual function
• Maximum, minimum and lock modes for continuous
scanning
• 8-beam laser target illumination
• Distance:Spot = 8:1
• Data-hold
• One-button operation
• Backlit HACCP check lights
• Battery status indication
• Food-safe ABS plastic with BioCote
®
• Stainless steel probe
• Auto-off
• Battery and instructions included
Get Professional Results
Every Time!
Monitoring temperature is essential to keeping food safe.
The versatile INTP662 is a powerhouse kitchen tool.
Simply point the infrared gun toward the target and press
the trigger to get a quick reading of surface temperatures
or flip down the rapid-response thermocouple probe to
measure internal temperatures. Integrated HACCP check
backlighting instantly shows if temperatures are within
HACCP guidelines for safe food temperatures.
Minimum, Maximum and Lock
The INTP662 also offers Minimum, Maximum, and Lock
modes. Minimum mode displays the lowest temperature
among multiple targets. Maximum mode displays the
highest temperature among multiple targets. While Lock
mode continuously displays the temperature for up to
60 minutes. This is particularly useful for continuous
temperature monitoring.
Note:
Remove sticker from display before use. Clean the
thermometer probe before each use.
Important: DO NOT LEAVE THERMOMETER IN HOT OVEN.
HAND WASH AND DRY. DO NOT IMMERSE HOUSING IN
LIQUID.
Note:
In the following instructions, names of the control
buttons are shown in CAPS. Function information that
appears on the display is shown in
BOLD CAPS
.
Battery Installation
Replace battery when LCD becomes dim. Power off the
unit before installing the batteries. A malfunction may
occur if the power is on when the battery is installed. If a
malfunction occurs, restart the device.
1. Remove battery cover by sliding it down along the
handle.
2. Install two 1.5V AAA batteries observing polarity
shown in compartment.
3. Replace the battery cover until it clicks shut.
Model: INTP662
ProAccurate
®
Infrared Gun/
Thermocouple Thermometer
Infrared: -76 to +662°F/-60 to +350°C
Thermocouple: -76 to +662°F/-60 to +350°C
