Ⅲ
. Machine instruction and part name:
Ⅳ
. Operation
1.
The unit should be installed on a work surface that has sufficient
stability and strength to support its weight.
2.
Ensure that the line voltage of the AC supply matches the rated
voltage of the slicer.
3.
Turn the switch on and let the unit run for 2-3 minutes to ensure that it
is operating properly.
4.
Turn the switch on, ensure that the power button lamp is lit, and the
blade rotates counter clockwise.
5.
Adjust the slice thickness by turning the slice thickness regulator
counter clockwise.
6.
Move carriage forward and back over the blade with a continuous
motion, using the product pusher handle and the pusher knob.
7.
After slicing the desired amount, turn the fixing positioner knob and set
the fixing positioner head back to the original position.
8.
You can now remove the slice.
Ⅴ
. Cleaning:
1. Always turn off and unplug the machine before cleaning, and make
sure to turn the slice thickness regulator to zero position.
2.
Never use any chemical or abrasive products. Do not use a brush or
1. Blade
2. Slicer thickness regulator
3. Sharpener
4. Blade cover
5. Active pusher
6. Carriage
7. Switch
8. Handle & scale
9. Product pusher handle
10. Plastic board
