14
3.
Use the flathead screw driver to pry the spark arrester out from the
muffler
4.
Remove the carbon deposits on the muffler screen and spark
arrester using a wire brush.
5.
Install the muffler screen.
6.
Install the cover
TROUBLE SHOOTING
Engine won’t start
1. Fuel systems
No fuel supplied to combustion chamber.
⚫
No fuel in tank….Supply fuel.
⚫
F
uel in tank….
Fuel tank cap air vent knob to
ON
, fuel cock knob to
ON
.
⚫
Clogged fuel line….Clean fuel line.
⚫
clogged car
buretor….Clean carburetor.
2
．
Engine oil system
Insufficient
⚫
Oil level is low….Add engine oil.
3. Electrical systems
Poor spark
⚫
Spark plug dirty with carbon or wet….Remove carbon or wipe spark plug dry.
⚫
Faulty ignition system….Consult dealer.
4. Compression insufficient
⚫
Worn o
ut piston and cylinder….Consult dealer.
Generator won
’
t produce power
Safety device (AC) to
OFF
…
Stop the engine, then restart.
Safety device (DC) to
OFF
…
Press to reset the DC protector
