CDI DIGITAL TORQUE TESTER DTT, Руководство по эксплуатации

Страница: 3 / 12

gENERAL sAFETY
WARNING
Improper use can cause breakage.
• Read instructions before operating.
• Follow manufacturer’s instructions, safety
precautions, and specifications when
operating tools.
Broken equipment can cause injury.
USERS AND BYSTANDERS SHOULD ALWAYS
WEAR EYE PROTECTION
• Flying particles can be discharged when
applying torque.
Flying particles can cause injury.
Risk of entanglement.
• Keep body parts away from rotating parts.
• Wear a protective hair covering to contain long
hair and prevent contact with moving parts.
• Do not overreach. Keep proper footing and
balance at all times.
Entanglement can cause injury.
Ac ADAPTER sAFETY
Risk of electric shock and fire.
• Do not allow conductive objects to come
in contact with terminals. 120 or 220 volts
present at adapter terminals.
• For indoor use only. Do not expose adapter to
rain or snow. Do not use in damp locations.
• Replace defective cord immediately. Return to
qualified service center for replacement.
• Do not use any other type of adapter. Using an
adapter not specifically designed for this unit
may damage tester.
• Do not use an extension cord with adapter.
• Do not use a damaged adapter.
• Do not disassemble adapter.
• Do not attempt to connect two adapters
together.
• Do not operate adapter with damaged cord or
plug. Replace immediately.
• Do not operate adapter after it is dropped,
receives a sharp blow or damaged. Take the
adapter to an Authorized Service Center.
• Unplug adapter from outlet before
maintenance or cleaning. Turning off tester is
not adequate to avoid hazard.
• Read all instructions and safety messages on
battery and adapter before use.
Electric shock or fire can cause injury.
• Fully engage the direction lever in the correct
position when using ratchets. Never attempt
to test an impact tool or pulse type tool on this
instrument.
• Mount the DTI securely to a heavy bench, wall
or other support structure before applying
torque.
• Do not use the DTT if it makes unusual noises,
has loose parts, or shows any other sign
of damage. Have repairs performed at an
Authorized Service Center before use.
• Do not use chipped, cracked, or damaged
sockets and accessories.
• Do not remove any labels. Replace any
damaged label.
TORqUE TEsTER sAFETY
TORqUE TEsTER sAFETY
WARNING
• Be sure ratings for all components, including,
adaptors, extensions, drivers and sockets,
match or exceed the torque being applied.
• Do not use this instrument with power switch
OFF. Always turn power switch ON so torque
values are displayed.
• Do not turn the power switch ON with a torque
instrument engaged to tester transducer.
• Be sure the capacity of the DTT matches or
exceeds each application before performing a
procedure.
• Pull on a wrench handle—do not push—when
tester is mounted horizontally. Adjust stance
to prevent a possible fall.
• Pull on a wrench handle—do not push—when
tester is mounted horizontally. Adjust stance
to prevent a possible fall.
• Do not use extensions, such as a pipe, on a
wrench handle.
WARNING
CAUTION
CLOTHING
DONOTCR DONTPULL
EARPROT DUSTMASK
DRWSTEP
EXTENDER
NO OVERTORQUE
EYEPROTEC FACESHLD FILTMASK
FIRE FALLING GEARS
HAMRON HAMMER2
WEARGLV
XPLOSION
VIBRATE
TIPOVER
SHOCK
PRYING PRWDRIVR
INFO SOLID CIRCLE
TRIANGLE
DANGER
C0 MASK NEEDED
TIP OVER CHILD
WARNING
CAUTION
CLOTHING
DONOTCR DONTPULL
EARPROT DUSTMASK
DRWSTEP
EXTENDER
NO OVERTORQUE
EYEPROTEC FACESHLD FILTMASK
FIRE
FALLING GEARS
HAMRON HAMMER2
WEARGLV
XPLOSION
VIBRATE
TIPOVER
SHOCK
PRYING PRWDRIVR
INFO SOLID CIRCLE
TRIANGLE
DANGER
C0 MASK NEEDED
TIP OVER CHILD
WARNING
CAUTION
CLOTHING
DONOTCR
DONTPULL
EARPROT DUSTMASK
DRWSTEP EXTENDER
NO OVERTORQUE
EYEPROTEC FACESHLD FILTMASK
FIRE FALLING GEARS
HAMRON HAMMER2
WEARGLV
XPLOSION VIBRATE
TIPOVER
SHOCK
PRYING PRWDRIVR
INFO SOLID CIRCLE
TRIANGLE
DANGER
C0 MASK NEEDED
TIP OVER CHILD