background image

3

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE 
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special 
local authority waste collection centre or to a dealer providing 
appliance recycling services.

Disposing of a household appliance separately avoids possible 
negative consequences for the environment and health.  It also 
enables the constituent materials to be recovered, saving both energy 
and resources.  As a reminder of the need to dispose of household 
appliances separately, the product is marked with a crossed-out 
wheeled dustbin  .

Please note:

  

 This appliance is designed to recirculate air only, under no 
circumstances should it be connected to any ductwork or 
external venting system.

  Do not use silicone sealant to secure the extractor to the ceiling.

   You must be able to isolate the extractor from the mains electrical 

supply after installation.

  Steam cleaners must not be used when cleaning this appliance.

   The performance of your extractor will vary depending on a number 

of factors, such as supply voltage and cleanliness of the filters.

Note:

For best performance, you should switch on the extractor 15 minutes 
before starting to cook and leave it to run for approximately 15 
minutes after the end of cooking.

Содержание 3S10BL





















Отзывы: