Manual CCV IM30
Rev.07
11 / 25
© CCV GmbH - Diese Unterlage darf ohne unsere Zustimmung nicht vervielfältigt oder weitergegeben werden.
This document must not be copied or distributed without our approval.
The following figures illustrate the positioning of the holes for mounting and the method of mounting.
Attention:
Mounting the 4xM4 screws has to be done with a force torque of 0.3Nm to max. 0.4Nm.
6
Connectors
6.1
Power/ Digital IO
The terminal can be powered by PWR-DIG I/O con-
nector (6pin WAGO, plug 733-106). This connector
also enables a digital IO port.
PWR-DIG I/O (WAGO 6pin)
Pin
DIGI_IN3
1
DIGI_IN2
2
DIGI_IN1
3
DIGI_OUT1
4
GND
5
PWR
6
Pin 6: This PIN can be used as PWR_In (power supply for IM30 if not supplied via MDB), or as PWR_Out
(for example power for digital -IO board) if IM30 is supplied via another pin (e.g. supply via MDB slave con-
nector). The following accessories are available for this purpose.
Part number
Name
Number
03133-91
Power supply
(cable + Adapter)
Poweradapter OPP for InSync/IM30
1
01272-42
Power Cord OPP-C60
1
