2
Carries multiple video signals even data down
ONE
RG59 cable!
V1
V2
V3
V4
V1, V2, V3 & V4
in this direction
1x RG59 co-ax cable
V1
V2
V3
V4
D
V
R
Mule 4 -
Tx
Mule 4 -
Rx
The CCTV Mule makes it easy to add extra cameras to existing
installations, you save installation time and reduce the cost of
buying and installing more cable.
The Mules work in pairs. One Mule combines the video signals to transmit them
down 1 single co-ax, the other Mule then reconstructs the individual video
signals at the remote end. A low-cost, easy solution that offers huge installation
benefits and opportunities to add extra cameras.
The clever electronics of the CCTV Mule also allow it to carry audio and RS485
data along the same co-axial cable. You can even carry three video signals in
one direction and a fourth signal in the other direction!
The CCTV Mules need a 12V power supply at both ends but other than that,
it’s a really simple device to use, with no real configuration to do.
4 Video signals down 1 co-ax cable
Mode
1
It has the following 5 operation modes...
12V DC
12V DC
Step 1
- decide on the operation mode you require the Mule4 to work in...
ule
CCTV
TM
CCTV Mule Instructions
