-1-
-3-
-4-
-2-
LN-60/200SW2-HK-STK
Instruction Guide
Thank you for purchasing a CCS product. To ensure proper use of the product,
please read this instruction guide before use and keep it for your future reference.
Warning
Do not disassemble or modify the product.
Doing so may result in fire or electric shock.
DISASSEMBLY
PROHIBITED
LED light radiation may cause corneal or
retinal abnormalities if you look directly at
the light. To prevent harmful light exposure,
never look directly at the LED light.
MANDATORY
ACTIONS
Do not touch the product with wet hands.
Doing so may result in electric shock.
DO NOT TOUCH
WITH WET HANDS
This product generates high temperatures. Do not
touch the product while it is turned on or immediately
after it is turned off, or burning may result. Provide
cooling with a fan or other ventilation if the product
is to be used in a closed space.
MANDATORY
ACTIONS
Make sure that the product is free of moisture
or any liquid. Exposure to water may result in
fire or electric shock.
DO NOT SUBJECT
TO MOISTURE
Connect or disconnect the light cable only after
turning off the power supply for the LED light.
Failure to do so may result in circuit damage,
fire caused by a minute spark, or electric shock.
MANDATORY
ACTIONS
If abnormal condition occurs such as fuming,
heat, smell, noise, or so on, stop using the product
immediately, and turn the power off. A fire or
electric shock may result if the product is kept used.
MANDATORY
ACTIONS
Line Light
The following symbols in the instruction guide indicate and classify the precautions.
These symbols indicate prohibited actions.
This symbol indicates required actions.
DO NOT TOUCH
WITH WET HANDS
PROHIBITED
MANDATORY
ACTIONS
DO NOT SUBJECT
TO MOISTURE
DISASSEMBLY
PROHIBITED
The following symbols are used in this instruction guide to indicate and classify
the relative importance of warnings and cautions.
Warning
Indicates that incorrect usage may
result in serious injury or death.
Caution
Indicates that incorrect usage may
result in injury or property damage.
This product has been designed with full consideration of safety. Incorrect usage of the
product may result in fire, electric shock, or other serious damages. Please ensure to
follow the conditions below.
Important Information for Equipment Safety
- Read Before Use -
2
Caution
Do not use user-made cables. Doing so may
cause product failure. Use the CCS extension
cable if it is necessary to extend the distance
between the light and the power supply.
PROHIBITED
U s e a s t a n d a r d E x t e n s i o n C a b l e t h a t i s
manufactured by CCS. However, if the cable is too
long, the light intensity will decrease due to the DC
resistance of the cable.
MANDATORY
ACTIONS
Be careful of static electricity. Damage to the
LED light may occur, if a person charged with
static electricity touches it. Keep the product
away from all items charged with static electricity.
PROHIBITED
Due to the structure of the product, leak
current may be produced as the result of AC
amplitude noise. This may cause the LEDs to
light incorrectly. Separate the product from
sources of noise.
MANDATORY
ACTIONS
Do not drop the product or subject it to impact.
Doing so may cause the product to malfunction.
PROHIBITED
The following tag is attached to the cable on the LED Light. The color of the label indicates the
luminescence color of the Light. The back of the tag there is a name label that gives the model
number, power consumption, and serial number. Be sure to check the contents before using the
product and handle the label with care. If the label is missing or damaged and the contents cannot
be checked, please contact CCS Inc.
Confirming Product Information
3
Tag example
Back
Front
LN-200SW2-HK-STK
012345-012345
xxV/xxW
MADE IN JAPAN
Please install the product to locations with following conditions.
Incorrect installation location may cause product failure.
In a stable location with minimal vibration.
Well-ventilated places with minimal dust.
Places that are not subject to sudden temperature
changes.
Places free from any water, oil, liquid, chemical, or steam.
Places free from corrosive or combustible gas.
Places away from water faucets, boilers, humidifiers,
air conditioners, heaters, or stoves.
Do not use the product in the following situations.
Under conditions or in an environment not described in this Instruction Guide.
In nuclear energy control systems, railroad systems, aviation systems, vehicles, combustion equipment,
medical equipment, amusement machines, or safety equipment.
In applications involving serious risk to life or property, particularly applications demanding a high level of safety.
This product is an LED light used for machine vision and industrial inspection. Do not use the
product for other applications, and be sure to follow the instructions below.
Introduction
1
Caution
Due to the structure of this product, current leakage may occur if it is exposed to AC amplitude
noise. If the product is installed in a place close to a source of AC amplitude noise, be sure
to insulate the product from the noise source. Failure to do so may cause the LED light to
malfunction due to the effect of the current leakage.
The line light condensing range can be adjusted by changing the distance between the cylindrical
lens and the light source inside the body. The distance between the lens and the light source may
be changed by sliding the body.
Adjusting the Line Light Condensing Range
3
When the correct line light condensing range is achieved, tighten the screws to fix the body in position.
82mm
97mm
2
Slide the body to adjust the distance between the lens and the light source.
Use the accessory hexagon wrench to loosen the screws.
1
* Shipment state
Fixed screws
Fixed screws
Cylindrical lens
The adjustable range is 15mm.
Hexagon wrench
(accessories)
* Tightening torque: 0.4 to 0.6N.m
Wire Connection
4
1
2
3
Make sure that the power supply for the LED light is turned off.
*Read the Instruction Guide of the power supply for the LED light before use.
Refer to the illustration below and connect the light cable to the power supply output connector.
Connect power cord to wall socket.
Product
-
Connection configuration
-
Light cable
Wall socket side
Output connector for light
Power supply for LED light rear view
Insert the plug
all the way into
the connector.
Camera
Operating Instructions
5
Preparation to Capture Images
1
2
3
Turn on the power supply for the LED light.
Focus the imaging device, such as a camera, onto the inspection object.
Adjust light range, light angle, and radiant quantity to optimize images.
*When using white LED lights with color image processing equipment, readjust the white balance
for the camera approximately 60 minutes after turning on the power.
Adjust the line light
condensing range
Use the power supply for the LED light to
adjust the radiant quantity.
*Read the Instruction Guide of the power
supply for the LED light before use.
Inspection object
Adjust the light range
and light angle.
Focus on the object.
- Imaging example -
Power supply for
LED light front view
LED lights generate heat that decreases radiant quantity and speeds degeneration. Follow the
instructions below in order to suppress the heat of LED lights and prevent decreases radiant
quantity and speeds degeneration.
Use the light with the light level turned as low as possible.
Only turn light on during imaging.
Installing a fan or providing air flow for heat dissipation.
Efficient Use of LED Lights
