Technical instructions
WEX30
v40EN
Lights must never be turned on outside of water.
2. Packaging Contents
1 BRIO WEX30 bulb with
• 2 stainless steel washers for connection
• Technical manual (this document)
3. Compatibility - Control
The BRIO WEX30 LED bulbs can operate autonomously with simple power cuts applied to the on/off switch,
or be controlled remotely using an RC+ system (Brio RC+, MOD Brio RC+ or MeteoR2), or a RC+ BTsystem
(Brio RC+, MeteoR2).
To get all lights synchronized in your pool you have to combine with RC+ and RC+ BT system compatible
lights. All after November 2016 manufactured CCEI lights (all X30 models) are compatible.
4. Use - Autonomous mode
In the absence of a control unit, the bulbs operate autonomously and the user can choose between 18 modes:
11 set colours and 7 programmes (with shorts cutting power supply).
Change of mode
• A small cut of power supply (less than 1s) switches to the next colour / sequence. Once all the colours are
displayed, the light goes back to the first colour (pure white).
• A cut of supply (2s) resets the light synchronization and switches them to second colour (blue)
• After a long stop (more than 4s) the lights show the last displayed colour.
Fixed colours and availables sequences
Colours and sequences are displayed in this order :
• 1 to 11 : fixed colours. 1.Pure white | 2.Blue | 3.Blue Lagoon |4.Cyan | 5.Violet | 6.Magenta | 7.Pink |
8.Red | 9.Orange | 10.Green | 11.See green
• 12 to 18 : sequences. 12.Fast gradient | 13.Slow rainbow | 14.Colours parade | 15.Techno rhythm | 16.Blue
variations | 17.Random parade | 18. Ramdom colours
5. Safety
If the temperature inside the WEX30 is abnormaly high, a safety device shuts off the lighting and produces
a red flashing light. As soon as the normal temperature returns, the bulbs return to normal working order.
www.c-
cei.fr
2
