CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 255 / 359

CCI.Command
– Operation
12
4 Operation
4.1 General instructions
CCI.Command is subdivided into 2 areas: the map view and the settings. When
changing between the two areas, note the following:
If all implement data have been transferred, then upon calling up the map,
operating mode
Section Control is automatically activated. If your return to the
settings, Section Control is automatically paused:
Call up the map
Activate operating mode Section Control
Switch to Settings
Pause operating mode Section Control
If no implement data was transferred, the upper area of the button is greyed out.
Section Control is not available, however the map can be called up:
Call up the map
Switch to Settings