CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 210 / 359

CCI.TECU
– Operation
11
4.2 Main view
The CCI.TECU main view provides the following information:
1. Name of the current tractor,
2. Speed display,
3. Power take off speed display,
4. 3-point hitch position display,
5. Display for the selected speed sensor and
6. Display for the working or transport position and the direction of travel.
Note
The speed display of CCI.TECU does not replace the tachometer of the tractor.
This speed control may not be used when driving on routes where road traffic
regulations apply.
You have the following operating options:
Change to the list of tractors:
Press the "List of Tractors" button (F8) on the touchscreen.
More detailed information about the list of tractors can be found in
chapter 4.3.
Change to the hectare counter:
Press the "Hectare counter" button (F12) on the touchscreen.
More detailed information on the hectare counter can be consulted in
chapter 4.4.
Select tractor
Edit the selected tractor
Select the speed sensor