CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 209 / 359

CCI.TECU
– Operation
10
Pos : 9 /CC-I sobus/Bedienung @ 8\ mod_1273573299873_6.doc @ 120150 @ 122333323323333442222
4 Operation
4.1 Program start
CCI.TECU is activated automatically by switching on the terminal. There is direct
access to all functions via the main view.
To switch to the main view of CCI.TECU, proceed as follows:
1. Press on the "TECU" button in the main menu of the terminal on the
touchscreen or turn the scroll wheel until the button is highlighted in white and
then press on the scroll wheel.
→ The following main view opens:
CCI.TECU is subdivided into 4 areas:
4.1.1 Main view
The main view is used to show the speed, power take off speed and 3-point hitch
and enables direct access to all TECU functions.
4.1.2 List of tractors
Input or modification of tractor data.
4.1.3 Hectare counter
The hectare counter allows you to measure and display the actual working time,
distance travelled distance and ground coverage, see also chapter 4.5.
4.1.4 Documentation
The documentation function allows you to perform task-related logging of process
data, see also chapter
Fehler! Verweisquelle konnte nicht gefunden werden. .
CCI.Control saves this process data in the active task.