CC-ISOBUS CCI 50, Руководство по эксплуатации

Страница: 100 / 359

CCI.Control
CCI.Control
–
Set-up for operation
11
3.3 Operating modes
3.3.1 Standalone mode:
To place CCI.Control into operation, proceed as follows:
1. Switch on the terminal.
2. Start CCI.Control.
3. Add a new task (cf. Section 4.4.2.2).
4. Start the task (cf. Section 4.4.3.1).
5. Stop the task following completion (cf. Section 4.4.3.1).
6. Print out the task report if required.
3.3.2 Recommended operating mode with GPS receiver, ISOBUS implement and FMIS
To place CCI.Control into operation, proceed as follows:
1. Plan your tasks using an FMIS.
2. Export the task data as ISO-XML on a flash drive or via online transfer.
3. Connect an ISOBUS implement to the tractor.
4. Connect the GPS receiver to the tractor.
5. Switch on the terminal.
6. If necessary, connect the flash drive to the terminal.
7. Start CCI.Control (cf. Section 4.2).
8. Import the task data (cf. Section 4.5).
9. Select the required task (cf. Section 4.4.2.3).
10. Start the task (cf. Section 4.4.3.1).
11. Stop the task following completion (cf. Section 4.4.3.1).
12. Print out the task report if required.
13. Export the task data to the flash drive or via online transfer (cf. Section 4.6).
14. Import the compiled data to the FMIS and analyse it.
Pos : 9 /CC-I sobus/Bedienung @ 8\ mod_1273573299873_6.doc @ 120150 @ 122333323323333442222