QUICK REFERENCE GUIDE
Congratulations on your new
CBTL
™
Single Serve Beverage System.
For first time use, please follow these steps.
Kaldi
Model
S04
Step 1
Carefully remove your new system from the box.
Step 2
Fill water tank to maximum fill level.
Step 3
Plug into grounded outlet and turn power
switch on.
Step 4
Place cup on drip tray.
Step 5
All three beverage buttons and the red light should be
blinking. Press the center button once and wait
approximately 2 minutes for machine to dispense
water from spout. The 3 beverage buttons will blink
while the red light stops blinking to confirm the
completion of this initial priming cycle. Repeat this step
only if red light continues to blink.
Step 6
After the priming cycle is complete, empty the
cup and water from the used capsule drawer
and then replace. The 3 beverage buttons will
stop blinking to confirm that the machine is
heated and ready to prepare your beverage.
INITIAL INSTALLATION & SET UP
USING YOUR SYSTEM
Step 1
Select preferred capsule for brewing:
CBTL™
Capsules include espresso,
brewed coffee and tea.
(see “CBTL™ Capsule Overview”
section for flavor descriptions).
For more detailed information, refer to the User Manual.
For household use only.
©2010 International Coffee & Tea, LLC. All Rights Reserved.
11CBV_HF_QuickUserS04 v.2
Order online at
CBTL.com
11CBV_HF_QuickUserS04_v.2.indd 1
4/5/11 10:45 AM
