11
drawer bottom
9
10
drawer back
12
drawer right
Made in Vietnam - r04
Page 4 of 4
platform
COFFEE TABLE
Fit dowels of drawer assembly into
corresponding holes of
drawer right
and attach
with 4
screws
as shown.
Repeat steps 8-11 for
remaining drawer assembly.
Fit glides of drawer assembly into drawer glides
of unit. Push drawer assembly into the glides
until the drawer is all the way in. Test the drawer
by opening and closing a couple of times to
ensure it is secure.
Assembly is now complete.
NOTE:
To remove drawers, fully extend the
drawer and push the lever on the right
drawer glide down and pull the lever
on the left drawer glide up while
pulling out the drawer.
left drawer
glide
right drawer
glide
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat
and water.
cleaning & care
Slide
drawer bottom
into corresponding
grooves of drawer assembly.
Customer Service
800.606.6252
| Latest instructions available on
www.cb2.com
Fit dowels of
drawer back
into corresponding
holes of drawer assembly and attach with 2
screws
as shown.
