Cayin SMP-PRO3, Руководство пользователя

Страница: 108 / 123

101
SMP-PRO SERIES USER MANUAL
7-4-5 Turn On / Off Display
You can choose to turn on or turn off the screen remotely with
SMP player (by cutting down the VGA signal). You can also
schedule the time period during which you hope to turn off the
screen to save energy. Please follow the steps below:
1. Login SMP Web Manager
2. Click [
SYSTEM
] and switch to [
DISPLAY
] page.
3. Please refer to the following table for more functions.
Display On/Off Press [
Off
] to turn off the display; press [
On
] to turn on
the display
Turn off display daily from Set a time period during which you hope to turn off the
screen every day.
Turn off display all day long
on the following day (s): Set a specific day in weekly basis to turn off the screen.
The screen will be turned off on the day you pick here.
4. Click [
SAVE
] and [
APPLY
].
If you configure the RS-
232 command to turn on/
off display, the command will
be sent based on the same
settings in this section.
The display command feature
o n l y w o r k s w i t h d i s p l a y
plugged to SMP via VGA and
with displays supporting the
feature to switch to stand by
mode.
Most screens will enter the
sleep mode when the VGA
signal is cut down by the
SMP player. However, some
s c r e e n s m i g h t r e s p o n d
u n e x p e c t e d l y, s u c h a s
showing a blue screen. The
outcome depends on the
firmware of each screen, not
SMP player.
If you choose the display
o u t p u t f r o m C o m p o s i t e /
S - Vi d e o o n S M P - P R O 3 /
PRO3N, you will not be able
to turn on/off the display
remotely.