5.0 OPERATION
The CaviBlaster
®
1030-ROV should only be operated by properly
trained personnel who are familiar with the contents of the manual.
Review the safety requirements found in Section 3 before operating.
5.1 Preparing the CaviBlaster
®
for Operation
The following checklist should be completed in advance, so that the unit is
always ready for immediate use. This should be completed after each use.
1)
Inspect the CaviBlaster
®
power unit, hoses, JIC fittings and lance for any
signs of damage.
2)
Inspect the water inlet strainer to ensure that it is not clogged (See Figure
2.1). Clean if necessary.
3)
Check for proper pressure pump oil level (See pump Owner’s Manual found
in the
Appendix
). Add oil (SAE 30 non-detergent) if necessary.
PUMP MUST
BE COMPLETELY FILLED.
Incorrect oils should not be used as they may damage the
equipment.
For more information please email [email protected] or call 1-(352)275-5319
Page 14/26
