- 11 -
POWER or OFF/ON
this button controls starting and stopping of the software system. (the indicator for POWER
on control panel indicates system in function). The button power controls running and
stopping of the whole system of wine cooler, but at every starting and stopping, the system
won’t start until 5 seconds after delay protection.
°C/°F
This button can switch from Fahrenheit to Celsius and vice versa. The temperature
indications are switching correspondingly. When switching, the corresponding indicator on
the right corner of digital display will start, and you can also choose the procedure of
memorizing Fahrenheit when starting operation.
Attention:
You can switch temperature display at will by pressing the button
”°C/°F”
for 3 seconds.
RUN:
Only when the compressor is working, the below corresponding LED indicator will be lit up.
The operational status of the compressor can be judged from lighting/stopping of the
indicator.
Self-detection:
When power is on for the whole cabinet by touching button ‘power’, mode of self-detection
will start.
In the process of detection, the figure on digital tube will be circularly lighted up, all the
electrical ports will be put into power from which we can judge whether the whole system is
running normally. Upon completion of detection after 10 seconds, normal mode of working
will automatically start.
Alarm system:
When faults of cooling systems for all the models of wine coolers occur, temperature inside
the cabinet runs higher than ≥ 30°C (86°F) for more than 2 hours, alarm system will work,
the cooling system will be automatically shut off with the buzzer buzzing intermittently.
