10
2.5
Swing-away Remote controller holder
To allow the user to drive the power wheelchair closer to an object or under the edge of a table, the
control panel can be swung to the side (see fig. 7).
1.
Swing the Remote controller holder to the side.
2.
Push it to bring the Remote controller holder back to its original position.
Fig. 7
2.6
Adjusting the armrest
To adapt the armrest height to the arm length of the user, you must loosen two clampers on the
armrest holder (see fig. 6). You can now slide the armrest up and down.
2.7
Lap Belt
The GTS3 can be equipped with a lap belt.
To apply the lap belt, insert the two buckle halves into each other until they lock in place fig. 8).
Then, verify that the belt has locked by trying to pulling it apart. The lap belt should not be too tight on
the body. Objects caught under the belt can cause painful pressure sores.
To open the lap belt, press the red release button.
The belt length can be adjusted on both sides.
Fig. 8
