16
17
Do not dispose of the device in household waste!
Recycle devices, accessories and packaging. Observe applicable national
regulations.
EU only: In accordance with European Directive on waste electrical and
electronic equipment and implementation in national law, used electric
power tools must be collected separately and handed in for environmen-
tally friendly recycling.
9. ENVIRONMENT
Nominal voltage
220 -240 V ~
Mains frequency
50 / 60 Hz
Power consumption
2300 W
Rated rmp (no load)
2200 min–1
Constant-Electronic
Yes
Smooth start
Yes
Overload protection
Yes
Temperature fuse
Yes
Saw blade ø
350 mm
Hole
30
mm
Tooth width
3.5 mm
Blade thickness 2.5 mm
Cutting depth
60° 0 … 60 mm
45° 0 … 90 mm
Cutting angle
0° … 60°
Weight (without accessories)
16 kg
Protection class
II
10. TECHNICAL SPECIFICATION
The soft start is a electric controlled start that ensures that the tool will
start smooth and nice. Without jerking and requires only a small starting
current (weaker fuses required).
6. SOFT START
The motor is stabilised electronically, this will make the cutting speed constant
even under heavy load.
7. CONSTANT SPEED
Levels determined in accordance with EN 60 745
are typically:
Sound pressure level
LPA = 102 dB (A)
Sound-power level
LWA = 113 dB (A)
Uncertainty
K = 3 dB
The noise that occurs during work can be harmful for
hearing.
Use ear protection to protect your ears!
Vibration emission value ah (vector sum for three
directions) and uncertainty K measured in accordance with EN 60 745:
ah = 3.1 m/s2
K = 1.5 m/s2
8. EMISSION LEVELS