ENGLISH June 2021 IND B
Page
60
of
156
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail : [email protected] - Tel 33 (0)4 68 80 13 13 - Fax 33 (0)4 68 80 13 19
WARNING
Scrupulously respect the usage instructions of the products you are using.
The hull treatment for the BALI 4.2 offered as an option by the yard comprises the following:
-
Degreasing and matting the surfaces
-
1 coat of primer
-
2 coats of antifouling
19.2. The hull
Two haulouts per year are preferable to one.
Haulout allows you to check the condition:
-
Of cleanliness of the raw water inlet strainers;
-
Of through-hull skin fittings;
-
Of seacock valves;
-
Of the rudders (check for any play or wear);
-
Of the anodes;
-
Of the propellers.
Maintenance:
Clean with a brush or a pressure washer:
-
Cold water;
-
Maximum pressure: 60 bars;
-
Never bring the nozzle closer than 60 cm from the hull;
-
Dry the hull;
-
Apply the antifouling with a brush or a roller.
TOPSIDES
The gelcoat is shiny and fade-resistant to atmospheric factors, in particular those found in the marine
environment. As such it requires little maintenance. However, it is a good idea to follow a regular
maintenance programme for the hull, in order to maintain its good appearance.
We recommend a wax or anti-UV wax treatment once a year on the smooth areas to keep them shiny.
WARNING
Scrupulously respect the usage instructions of the products you are using.
WARNING
In the event of an impact with a sharp object, the hull is liable to have been breached. Should this be
the case, repairs must be effected as soon as possible.
