ENGLISH June 2021 IND B
Page
34
of
156
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail : [email protected] - Tel 33 (0)4 68 80 13 13 - Fax 33 (0)4 68 80 13 19
6.4. Operating the sea toilets
-
Open the seawater inlet valve.
-
Open the outlet valve (if the boat does not have the Holding tank option).
-
Move the lever to the “flush” position.
-
Pump the handle.
-
To empty the bowl and avoid any ingress of water when heeled, move the lever to the "dry bowl"
position.
-
Pump the handle until the bowl is dry.
-
Repeat this operation of flushing / emptying the bowl as many times as necessary to ensure that
the hoses are completely empty.
-
When the toilets are not in use, put the lever in the “LOCK” position
.
-
Close the valves after use, as the toilet is located below the waterline.
Regularly change the seals and filter of the seatoilet.
6.5. Operation of the electric seatoilets
The control panel for flushing and emptying comprises two buttons.
-
Check the level in the holding tank before using the seatoilets.
-
Before using, ensure there is sufficient water in the bowl to avoid toilet paper becoming
compacted in the bottom of the bowl.
-
Use soft, good quality, domestic toilet paper but do not use more than is necessary.
-
Next, empty the toilet until the bowl is dry. Always leave the bowl empty to minimize odours and
spillage of water.
Flush position
Selector
Dry bowl position
“LOCK” Position
