Catalyst AirCom UWB Analyzer, Руководство пользователя

Страница: 102 / 110

Catalyst Enterprises Inc. Appendix B
94
SetTableHeader
SetTableHeader( string );
SetTableHeader( OptionalFieldId );
Remark
This statement sets the table header of interpreted data. The viewer will show the
string in the header of the table that shows the interpretation of data. If user uses the
SetTableHeader( OptionalFieldId ) form of this statement, then the option string of
the specified OptionalFieldId will be set as table header.
Parameter
String Specifies the string that will show in the header of the table.
OptionalFieldId Specifies the FieldId of an optional field.
Example
OpCode = AddField (0, 8, “Op Code”, “Op Code”,
“Op Code”);
If (ValueOf (OpCode) = 0x01) then /* Read
command */
{
SetTableHeader (“Read”);
/* Remained decoding */
}
SetFieldTableHeader
SetFieldTableHeader( FieldId, string );
SetFieldTableHeader( FieldId, OptionalFieldId );
Remark
This statement sets the table header if the user has specified that sub fields of a field
are shown as separate table. (See SubFieldOf statement).
If the user uses the SetFieldTableHeader( FieldId, string ) form of this
statement, the specified string will be set in the table header, and if user use
SetFieldTableHeader( FieldId, OptionalFieldId ) form of this statement, the
option string of the specified OptionalFieldId will be set in the table header.
For more information about optional field please see See “Define Option
Block” on page 87..
Parameters
FieldId The field Id that was defined by AddField
String The string that user wants to show in the header of the table.
OptionalFieldId Specifies FieldId of an optional field.