ASSEMBLY INSTRUCTIONS
Model Number:20416-000
TABLE LAMP
6.
2.
This lamp is approved for indoor use only.
3.
Avoid laying objects directly over the power supply
cord to avoid cutting or damaging the wire.
Do not install non-factory wiring or any other
electrical components. Altering or modifying
the lamp in any way will render the product
unsafe.
Keep curtains, shades, wall hangings and all
other fabrics and objects away from the lamp,
lamp switch and light bulb. Lamps are not
designed to support additional weight.
Place the lamp on a stable, level surface in an
areawhere the lamp will not be tipped over or
bumped.
4.
5.
BULB REPLACEMENT
(not included).
1
.
To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The plug will fit in a polarized outlet only one way.
If the plug does not fit fully into the outlet reverse
the plug. If plug still does not fit, contact a qualified
electrician. Never use an extension cord unless the
plug can be fullyinserted. Do not alter the plug.
Read and Save:
IMPORTANT SAFETY INSTRUCTIONS
Use one 100 Watt, Type A bulb or CFL or LED
equivalent.
Printed in China
DO NOT EXCEED MAXIMUM BULB WATTAGE.
CLEANING AND MAINTENANCE
1
. To clean : use a soft, dry cloth only.
2.
Do not use chemica l or abrasive cleaners.
2.
Light bulb should never touch the shade.
1.
Turn off and unplug lamp and allow the bulb to
cool before replacing bulb.
NOTE:
Carefully pull out any excess power cord through
base (A) while assembling to prevent the cord from
becoming twisted.
1. Place the base (A) on a flat surface.
2. Insert and thread socket assembly (B) into base (A) by
turning clockwise until secure.
3. Install light bulb into socket assembly (B).
4. Pinch and insert harp (C) into the harp fittings on
socket assembly (B). Slide the caps on harp (C) over
the fittings on socket assembly (B) to secure.
5. Remove the finial (E) from the harp (C), place the
shade (D) on the harp (C) and secure with finial (E).
6. Insert plug into an electrical outlet.
7. Use the rotary switch on socket assembly (B) to
turn lamp ON and OFF.
