C o n t a c t s
10. Contacts
You can save multiple phone numbers and text, such as an e-mail address, a
street address, or a note under a name in the contacts directory.
To quickly access the list of names in the contacts directory, press
in
the idle mode. To open the Contacts menu, select
→
Note that Contacts can also be updated by using over-the-air programming.
New contacts can be sent from the network, or the existing numbers can be
edited. When Contacts have been updated, the radio plays a tone and
will be displayed. If the same name already exists in
Contacts that was programmed from the network, the network-programmed
number will be set as a default number. This feature cannot be used while in
direct mode.
You can also see details of you subscriber identity, if so defined, and the
terminal’s software version information from
→
Q
Save names and numbers
You can save at least 255 names and phone numbers in Contacts, and up to
five numbers and up to two text notes under a name. You may be able to save
more than 255 names and numbers if your radio has enough memory.
Each number must be assigned a number type when it is saved in Contacts.
You can call a saved number only if it has been assigned the correct number
type.
The first number saved under a name is automatically set as the default
number. When you select a name from Contacts, for example, to make a call,
the default number is used unless you select another number. The default
number is indicated by a box around the number type indicator (for example,
).
1. Select
→
.
2. Enter the name, and press
.
TMR880i_rel7.book Page 65 Mardi, 27. août 2013 11:00 11
