Y o u r r a d i o
Red key calls and status sending
In the network mode, the
red key call
is a network service. Before you can
take advantage of this network service, you must subscribe to it through your
service provider, and obtain instructions for its use from your service provider.
Depending on the settings defined by your organisation, either a red key call
can be made or a status message can be sent, or both of them can be done
simultaneously. The
red key call
is made and the status message is sent to a
destination that has been predefined by your organisation.
Making a red key call
In the network mode, when you press and hold the red function key, the radio
will attempt to make a
red key call
. When you press the red function key and
then the back key, the radio will attempt to make a silent
red key call
. It is
possible to predefine the
red key call
so that it can be made in direct mode if
the service has not been established within a predefined time (1-60 seconds).
For information on
red key calls
in the direct mode, see Red key calls and
emergency calls in direct mode on page 54.
If the radio receives a
red key call
, or a call made to a destination that is
predefined as an emergency number, the radio plays a tone, and
is displayed with the call information.
Note that your organisation can predefine the
red key call
in a way that a
speech item of a
red key call
needs to be ended manually or in a way that it
has a predefined autotransmit time after which the call is ended automatically.
Sending a red key status message
When you press and hold the red function key, the red key status message is
sent to a destination predefined by your organisation.
Making a red key call and sending a status message
Making a
red key call
and sending a status message can be done also
simultaneously, either to the same destination or to different destinations. For
more information, contact your organisation.
TMR880i_rel7.book Page 20 Mardi, 27. août 2013 11:00 11
