19
Version 270114
5. Installation and use
5.1 Safety instructions.
DANGER ELECTRIC SHOCK
!
- Don’ t let the power supply cord touch hot parts
- Don’t let the power supply cord along a table or a counter
- Your appliance must be installed in a dry place : never let the power supply in contact of humidity.
- The appliance must be connected with a single-phase socket in conformity.
- Before any installation check all the electric cables or piping
WARNING !
To avoid injuries and burns do not use the appliance if it is damaged. Do no use spare parts
not provided with your appliance.
DANGER ELECTRIC SHOCK !
In the event of bad installation, the appliance can be dangerous and cause injuries. The electrical
safety of this appliance is ensured only if it is correctly connected to an efficiently earthed system in
accordance with electrical safety regulations. The appliance must be unpacked entirely before the
connection.
5.2 Installation and use
WARNING !
Installation and maintentenance must be only carried out by qualified technician.
Mode d’emploi :
- Remove all protective foils and packaging material prior to usage.
- Place the appliance on a flat, solid, and heat-resistant surface, on its vertical position. Never
install your appliance on inflammable surface. The appropriate site for the installation of the unit is a
dry and well-ventilated position, the lateral distance between the appliance and wall and other
appliance must be at least 10cm.
- Do not install the appliance near open fireplaces or all hot sources.
