10
Please note
►
Pusher C always has to be inserted in the feed chute of the lid, as its
pin unlocks the safety protection of the device.
►
Pay attention to the MAX mark on the feed chute. If the food is higher
than this mark, the pin of pusher C maybe can’t unlock the device.
►
For the best performance, choose the smallest size pusher.
Attention
►
Never put your fingers in the feed chute.
5.2 Assembling the blades
1. Clean all portable parts like described under
cleaning and maintenance.
2. Follow below flow picture step by step to
assemble the device
3. Place the container on the motor block. Turn it
clockwise to lock it.
4. Assemble your desired blade on the carrier like
shown in step 3. Ensure that it’s fixed well on the
carrier.
5. Place the carrier on the pin in the middle of the
container.
6. Place the lid on the container. Turn the lid
clockwise until it is locked.
7. Remove the pushers A and B.
8. Plug in the device, you can start the device with the control knob and insert the ingredients
now.
9. You can put in pusher A and B again after inserting all ingredients, so no liquids can splash
out during operation.
10. After operation, you can disassemble the device by opposite flow and direction.
Please note
►
Ensure that the container in step 2 and the lid in step 5 are locked well, or the machine will
not work.
Attention
►
Only open the lid when the blades have stopped completely.
►
Always be careful when handling the blades as they are very sharp.
5.2.1
Chopping blade
With the chopping blade you can cut vegetables, fruits, meat, nuts, herbs,
chocolate, dried bread cubes, dried fruits or ingredients of a similar
consistency.
