08CH ACTIVE CAT5 VIDEO RECEIVER/HUB
HOJA TECNICA/ MANUAL USUARIO
CSM-108R Frontal Panel CSM-108R Rear Panel
‘Hub-Bar’ Rejective Active UTP
Video BALUN
Video Transceiver Introduction
08 Channel CAT5 Video Receiver/Hub is an active (amplified) pair equipment
that allows the extension of real-time monochrome or color video on up to
4000ft (with Image figure enhanced function), using Category-5 Unshielded
Twisted-Pair (UTP) CAT5 networking wire. Composite Video Broadcasting
Base band (composite-CVBS/AV, PAL/NTSC/SECAM) signals of any video
type are supported.
The unparalleled interference rejection and low emissions of the transceiver
allows long run video signals to co-exist in the same wire bundle as telephone,
data-com, or low-voltage power circuits. This allows the use of shared or
existing cable plant.
Ground-lifting circuit design ensures no annoying "hum-bars" when ground
potential differences exist.
Built-in lightning protection, transient protections, ESD protection, power line
contact protection, damaging voltage spike problems are eliminated.
Equipment Specifications
Cable Distance
：
Up to 5000ft Transmitter-Receive UTP Cat 5 or better.
Point to Point transmission of real-time PAL,NTSC or SECAM 08 channel
CVBS video signals.
Image figure enhanced function in output of CAT5 video receiver.
Lightning protection, Transient protection, ESD protection, Power Line Contact
protection, damaging voltage spike problems are eliminated.
Dimensions: 326X120X33mm, GND screw connector.