Casio XJ-S30 - 2 Скачать руководство пользователя страница 11

Страница: 11 / 108

Installing Data Projector Software

Use the procedures in this section to install the software that comes bundled with the
Data Projector onto your computer.

Minimum System Requirements

The following describes minimum computer system requirements to run the bundled
software.
• Operating System: Microsoft

Windows

XP or 2000 Professional

• Computer: IBM PC/AT or compatible that conforms to the following conditions.

• Windows

XP or 2000 Professional pre-installed

• PowerPoint 2000, 2002, or 2003 installed (to use EZ-Converter)
• CPU: Pentium

III

or higher

• USB port (Type A, USB1.1/2.0)
• Memory: 256 MB minimum or amount of memory recommended for operating system

being run

• Hard Disk: At least 40 MB for installation or at least 60 MB when running
• Display: Full-color display with resolution of at least 800 × 600 that is supported by

above operating systems and the computer being used.

• Pointing Device: Mouse or other equivalent device supported by above operating

systems.

• Keyboard
• CD-ROM drive
• Other requirements of operating system being used

• Normal operation may not be possible under certain hardware configurations.
• Operation is not supported on a computer running Windows

NT, Me, 98SE, 98, 95, or

3.1, or on a Macintosh or Mac OS computer.

• Operation on a computer upgraded to Windows

XP, 2000 Professional from another

operating system is not supported.

• Operation on a computer running Windows

XP Professional x64 Edition is not

supported.

When you want to do this:

Install this software:

Convert files created with PowerPoint to image (JPEG) files and store
them on a USB memory device

EZ-Converter

Send computer screen contents to the Data Projector over a wireless
connection and project them

Wireless Connection

Содержание XJ-S30 - 2













































































































Результаты поиска

Содержание XJ-S30 - 2

Отзывы:

Похожие инструкции для XJ-S30 - 2

Бренды по названию

Популярные бренды

Casio XJ-S30 - 2, Руководство по эксплуатации функций

Результаты поиска

Содержание XJ-S30 - 2

Отзывы:

Похожие инструкции для XJ-S30 - 2

Бренды по названию

Популярные бренды