Casio QW 5531, Руководство по эксплуатации, Страница: 3 / 26

Mode Overview
●
Timekeeping Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands indicate the
current World Time.
30
①
③ ② ④ ⑤ ⑥ ⑦
Current location
time / World Time
swapping
(Hold down about
3 seconds.)
A
Current location time (24-hour time)
One revolution every 24 hours.
B
Current day of the week
C
World Time hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
D
World Time hour
E
World Time minute
F
Current location date
G
World Time City
●
Stopwatch Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
30
② ①
③ ④
⑤
Start /
Stop
Reset
A
Current location time (24-hour time)
One revolution every 24 hours.
B
Stopwatch seconds
C
Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
D
Stopwatch hours
E
Stopwatch minutes
●
Timer Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the current countdown
time.
30
②
③ ④ ⑤
①
Start /
Stop
Reset
A
Current location time (24-hour time)
One revolution every 24 hours.
B
Timer seconds
C
Timer hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
D
Timer hours
E
Timer minutes
●
Alarm Mode
The main hour and minute hands indicate the
current time.
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
30
①
③ ② ④
⑤
Enabling /
Disabling the Alarm
A
Current location time (24-hour time)
One revolution every 24 hours.
B
Alarm hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
C
Alarm enabled/disabled
D
Alarm hour
E
Alarm minute
Using the Crown
The watch’s crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Loosen
Crown
●
Pulling Out and Pushing In the Crown
To perform a crown operation, pull it out to the
first or second click and then rotate it. Do not
pull the crown with too much force.
First click
Normal timekeeping
Second click
Important!
●
To prevent loss of water resistance
and/or damage due to impact, be
sure to screw the crown in by rotating
it away from you as you push it in.
Screw in
●
When pushing the crown back in,
take care not to apply too much
force.
Operation Guide 5531
3