65
Using the Setup Menu
This function controls the icon display on LCD monitor for both Record mode and
Playback mode.
Available settings are: On, Detailed Info, Off.
If Display Mode is set to Off, the mode icon and remaining shots will be displayed for
2 seconds in following situations:
• Power on the camera
• Switch from Playback to Record mode
• After shooting
• Close the menu and back to preview
This function allows you to select a method to assign file numbers to images.
Available settings are:
•
Series:
Assigns numbers to files in sequence even if the folder is changed.
•
Reset:
The file numbering will start from 0001 each time a folder is changed or the
memory is formatted.
To understand folder and file structure of your camera, see “About Folder and File
Names” on page 84.
Use the TV Out function to adjust video output signal to accommodate different
regional settings. If TV out is not set correctly, the image may not display properly on
TV.
Available settings are:
•
NTSC:
Applicable in Japan, USA, Canada, Taiwan and others.
•
PAL:
Applicable in Europe, Asia (excluding Taiwan), Oceania and others.
Setting Display Mode
Setting File Numbering
Setting TV Out
