Casio Privia PX-S3000 Скачать руководство пользователя страница 11

Страница: 11 / 94

Overview and Setup

EN-10

■

Expression Pedal Calibration

When connecting an expression pedal to the

EXPRESSION/ASSIGNABLE

jack for the first time,

perform the calibration operation below.

Connect an expression pedal to the

EXPRESSION/ASSIGNABLE

jack.

Hold down the

button until “[FUNCTION]”

appears on the display.

This enters the FUNCTION Mode.

Use the

and

buttons to display

“PEDAL/WHEEL” and then touch

ENTER

Use the

and

buttons to display

“EXP/ASGN PEDAL” and then touch

ENTER

Use the

and

buttons to display

“Exp Calibration” and then touch

ENTER

This displays “Sure?”. If you want to cancel the operation
at this point, touch

–

here.

Touch

to start adjustment.

While “Highest” is displayed, press the top of
the pedal down as far as it will go and then
touch

ENTER

While “Lowest” is displayed, press the bottom
of the pedal down as far as it will go and then
touch

ENTER

The message “Complete” will appear when the operation
is complete.

To exit the FUNCTION mode, hold down

EXIT

until “[FUNCTION]” disappears from

the display.

Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.

• Be sure to turn down the volume level before connecting

headphones.

• Headphones do not come with the Digital Piano.
• Use commercially available headphones. See page

EN-1

for information about options.

• Do not listen to very high volume output over

headphones for long period. Doing so creates the risk
of hearing damage.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor plugged
in when you unplug the headphones. If you do, nothing
will sound from the speakers when you play.

■

To output from the speakers while headphones
are connected

While FUNCTION parameter

104

(“Speaker Out”) is enabled

(“On”), sound will be output from the speakers even if
headphones are connected to the PHONES jack. For
information about FUNCTION parameters, see “

Configuring

Function Settings (FUNCTION Mode)

” (page

EN-53

Using Headphones

PHONES

jacks (Stereo mini jack (3.5mm))

Содержание Privia PX-S3000































































































Результаты поиска

Содержание Privia PX-S3000

Отзывы:

Похожие инструкции для Privia PX-S3000

Бренды по названию

Популярные бренды

Casio Privia PX-S3000, Руководство пользователя

Результаты поиска

Содержание Privia PX-S3000

Отзывы:

Похожие инструкции для Privia PX-S3000

Бренды по названию

Популярные бренды