Operation Guide ID-15
1
MA0505-EA
1cm
ALM/SNZ
INVALID
INVALID
ON
OFF
RESET SET
°
C/
°
F
SNZ
ALM/SNZ
INVALID
INVALID
ON
OFF
RESET SET
°
C/
°
F
SNZ
ALM/SNZ
INVALID
INVALID
ON
OFF
RESET SET
°
C/
°
F
SNZ
ALM/SNZ
INVALID
INVALID
ON
OFF
RESET SET
°
C/
°
F
SNZ
•
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
•
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes,
seconds)
Day of the week
Current temperature
Date
(month - day)
PM
indicator
Alarm time
Snooze on
indicator
Alarm on indicator
Alarm Off
Snooze Alarm On
ILLUSTRATION
GENERAL GUIDE
1
1
1
1
1
ALM/SNZ button
•
Pressing this button while the alarm is sounding stops the alarm.
2
2
2
2
2
Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
3
3
3
3
3
+ / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
4
4
4
4
4
°
C/
°
F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
5
5
5
5
5
SET button
Use this button when setting the current time.
6
6
6
6
6
RESET button
Press this button to reset the clock after replacing its batteries.
•
Buttons marked “INVALID” have no function.
USING THE CLOCK
1. Press the
SET
button (
5
) to cycle through the setting screens as shown below.
12-hour/24-hour
Timekeeping Screen
Time Setting Screen
Month and Day
Setting Screen
Year Setting Screen
Normal Timekeeping Screen
2. While the screen you want is displayed, use the
+
and
–
buttons (
3
) to change the flashing digits.
•
Holding down
+
or
–
changes the flashing digits at high
speed.
•
You can set the year in the range of 2000 to 2039. The
day of the week is set automatically in accordance with
the date setting.
•
Pressing
+
or
–
while the Time Setting Screen is on the
display causes the seconds count to be reset to 00.
•
Each press of
+
or
–
while the 12-hour/24-hour
Timekeeping Screen is on the display toggles between
12-hour and 24-hour timekeeping.
3. After making the settings you want, use the
SET
button (
5
) to display the Normal Timekeeping Screen.
•
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
ALM/SNZ
INVALID
INVALID
ON
OFF
RESET SET
°
C/
°
F
SNZ
Press
–
to
decrease
the flashing
digits.
Press
+
to
increase
the flashing
digits.
