Casio G-Shock 5657, Руководство по эксплуатации, Страница: 17 / 27

Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
●
If you select a World Time City with G-
SHOCK Connected and then change
to a different city with a watch
operation, the G-SHOCK Connected
city information is deleted from the
watch.
l
Configuring World Time Settings
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
After swapping Before swapping
Home Time World Time
Home Time World Time
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
Moving to Another Time Zone
Alarm
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
●
The alarm sound is muted in the cases
described below.
ー
When battery power is low
ー
When watch is at Level 2 power saving
l Power Saving Function
Using G-SHOCK Connected
to Configure Alarm Settings
If the watch is paired with a phone, you can
also use G-SHOCK Connected to set alarms.
l
Configuring Watch Settings
Configuring Alarm Settings
1.
Enter the Alarm Mode.
l
Navigating Between Modes
2.
Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the alarm you want to
configure is displayed.
Alarm time Alarm number
3.
Hold down (A) for at least two seconds.
Release the button when the hours digits
start to flash.
Alarm hour
4.
Use (B) and (D) to change the hour setting.
●
If you are using 12-hour timekeeping,
[P] indicates p.m.
5.
Press (C).
This causes the minutes digits to flash.
Alarm minute
6.
Use (B) and (D) to set the minute setting.
7.
Press (A) to exit the setting screen.
●
[ALM] is shown on the display while an
alarm is set.
8.
Hold down (C) for at least one second to
return to the Timekeeping Mode.
● To stop the alarm
Pressing any button while the beeper is
sounding stops it.
Note
●
A beeper sounds for 10 seconds when
an alarm time is reached.
●
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
Watch Operation Guide 5657
17